ARC-1850 Stud Welder
- Designed and built in U.S.A.
- Constant current output
- Single or dual gun systems
- Independent gun controls
- Precise weld time and weld current adjustments
- Digital display of actual weld time and weld current
- Diagnostic L.E.D.’s
- State-of-the-art gun control circuitry
- Built-in chuck saver
- Auto-safety shutdown
The Pro-Weld International
ARC-1850 is a compact and portable stud welding power supply capable of welding studs thru 7/8″ diameter weld base. The power supply, which operates on three-phase power, has the added feature of weld current regulation that improves stud welding consistency. Both the weld time and weld current are infinitely adjustable for preciseness and repeatability.
A specially designed electronic gun control circuit has been incorporated to increase overall reliability. If a fault condition occurs due to a shorted gun solenoid or a faulty control cable, the circuit will prevent gun retriggering and eliminate damage to printed circuit boards.
Components
| Description | Part No. |
|---|---|
| System, Dual | 100-210D 1850 |
| System, Single | 100-210S 1850 |
| Ground Cable 25′ x 4/0 | 125-0104 1850 |
| Combo Cable 50′ x 4/0 | 125-1002 1850 |
| Power Supply, Single | 200-0022 1850 |
| Power Supply, Dual | 200-0023 1850 |
| Weld Gun | 300-0600 1850 |
Specifications
| Dimensions | 26″ H x 24″ W x 33″ D |
|---|---|
| Output | 1850 Amps @ 45 VDC |
| Weight | 500 lbs |
| Duty Cycle | 12 GA-5/8 Unlimited 3/4 10/Min, 7/8 4/Min |
| Input | 230/460/575 VAC 3 Phase 60HZ |
| Fusing | 200/100/90 Delay Type |
| Time Control | Stepless Adjustable .1-1.6 sec |
| Current Control | Stepless Adjustable 100-1900 Amps |
.