ARC-800 Stud Welder
- Designed and built in U.S.A.
- Regulated ouput current
- Precise weld time and weld current adjustments
- Storage Compartment
- Diagnostic L.E.D.’s
- State-of-the-art gun control circuitry
- Thermally Protected
- Portable
- Easy access to control circuitry
The Pro-Weld International
ARC-800 is a compact and portable stud welding power supply capable of welding
studs thru 1/2″ diameter weld base. The fully regulated power supply, which operates on
single-phase power, produces a smooth, stable welding arc. Both the weld time and weld
current are infinitely adjustable for preciseness and repeatability.
For maximum flexibility, the weld time can be switched between two ranges.
The expanded short time range provides fine adjustment of weld time for special short
cycle applications such as welding to thin materials.
A specially designed electronic gun control circuit has been incorporated to
increase overall reliability. If a fault condition occurs due to a shorted
gun solenoid or a faulty control cable, the circuit will prevent gun retriggering
and eliminate damage to printed circuit boards.
Components
| Description | Part No. |
|---|---|
| System Complete | 100-0211 800 |
| Ground Cable 1/0 x 25′ | 125-0102 800 |
| Combo Cable 1/0 x 50′ | 125-1000 800 |
| Power Supply | 200-0026 800 |
| Weld Gun | 300-0500 800 |
Specifications
| Dimensions | 36-1/2″ H x 16″ W x 14″ D |
|---|---|
| Output | 900 Amps |
| Weight | 150 lbs |
| Duty Cycle | 1/4 14/Min, 5/16 12/Min, 3/8 10/Min, 1/2 5/Min |
| Input | 208/230/460 VAC Single Phase 60HZ |
| Fusing | 100/100/50 Amps |
| Timer Control | Stepless Adjustable .05-.6 sec |
| Current Control | Stepless Adjustable 100-900 Amps |
.