CD-512 Capacitor Discharge Stud Welder
- Designed and built in U.S.A.
- Safety Fault Shut Down
- Recessed Control Panel
- L.E.D. Panel Meter
- Diagnostic L.E.D.’s
- Powder Coated
The Pro-Weld International CD-512 is a state-of-the-art solid-state capacitor discharge stud/pin welder. Its rugged design and user-friendly controls make it simple to set up and use.
The extremely short weld time of the capacitor discharge process allows studs to be welded to material as thin as .015 without burn-through.
The unit is capable of welding mild steel, stainless, and aluminum studs as well
as cuphead pins.
Parts List
| Description | Part No. |
|---|---|
| System Complete | 100-0110 |
| Ground Cable | 125-0101 |
| Power Unit Only | 200-0013 |
| Gun Only | 300-0200 |
Specifications
| Dimensions | 8-1/2″ H x 13-1/4″ W x 16-1/2″ D |
|---|---|
| Stud Range | #2 – 3/8″ |
| Weight | 55 lbs |
| Capacitance Charge | 88,000 MFD Low, 176,000 MFD High |
| Range | 45-185 VDC |
| Mode | Contact Gap (optional) |
| Weld Rate | 24 Studs/Min. |
| Input Power | 110 VAC, 20 amps |
.