HBS-CI-03Â Stud Welding Gun (for insulation)
CD stud welding according to current standards.
Application
- Especially suitable for thin sheets (at least 0.5 mm)
- ISO – especially suitable for welding on cupped head pins (for fixing heating, ventilation and air-conditioning mats – HVAC)
- Especially suitable for insulation mats with and without an aluminum cover. The cupped head pin has a special tip that
permits particularly easy penetration of the insulation materials. Variably adjustable spring pressure allows the stud
welding gun to be optimally adjusted to a wide range of material densities - The fixing method with cupped head pins replaces the complex procedure: weld on pin – press mat over pin – affix clip – pinch off or bend over projecting tip
Process variants
- Contact welding
Technical Data
| Welding range | Cupped head pins dia. 14 ga/12 ga (dia. 2/2.7 mm) |
|---|---|
| Pin length | 0.37″ to 6.00″ (9.5 to 152.4 mm) |
| Pin material | Mild steel, stainless steel |
| Pin type | Cupped head pins |
| Spring pressure | Adjustable, arresting |
| Welding cable | 32.81′ (10 m) |
| Insulation class | IP 20 |
| Workplace noise level | > 90 dB (A) may occur during welding |
| Operational and storage conditions | According to current standards |
| Dimension L x W x H | 6.89″ x 1.97″ x 5.71″ (175 x 50 x 145 mm) without cable and tripod |
| Weight | 1.54 lbs (0.7 kg) without cable and tripod |
| Order No. | 92-20-254 |
Advantages
Structure
- Rigid casing made of impact-resistant plastic
- Torsion-resistant basic shell (casing) to accommodate all function elements (e.g. ball bearing guide) and accessories (e.g. foot ring)
- Zero-play ball linear bearing for guiding the welding piston
- Sealed welding piston guidance
- Ergonomic design
- Compact dimensions
- Mechanical structure tested in production
Safety
- Lock-in spring adjustment
- High level of security to prevent the selected settings from being changed inadvertently
- Guidance system protected against spatters
Welding
- Individual adjustment options for optimum welding results
- Optimum handling and fatigue-free operation
- Optimum operation also at places that are difficult to access
- Welding on painted sheets is possible (clean, smooth, and flat surfaces and grounding required)
- No damage to the reverse of thin zinc-plated sheets when complying with specified welding parameters, particularly in
the case of cupped head pins with 2 mm diameter (zinc and corrosion protection on the reverse is retained) - Low energy expenditure
- Very fast fixing: Press the cupped head pin through the mat, welding in 3 milliseconds
- Low power input for pins with dia. 2 mm diameter
.