Production Fastening Systems Self-Locking Washers are used in conjunction with Production Fastening Systems weld pins, insul-anchors, and lacing anchors to fasten insulation in place. Simply press the self-locking washer onto the pin against the insulation until the desired position is reached. Then, clip off, or bend over, the remaining portion or pin for a permanent attachment.
The choice between Round or Square self-locking washers is basically a matter of aesthetics or personal preference. The domed, multi-laned hole design provides for ease of locating washer on pin and positive self-locking. Some styles of washers are manufacturerd with a beveled edge to prevent the washer from cutting into the insulation facing.
Production Fastening Systems Self-Locking Washers are available according to the chart above and with standard 10 GA, 12 GA, or 14 GA hole sizes off-the-shelf. Other material / plating combinations and hole sizes are available by special order.
| Prod Id | Packaged Per Carton | Diameter | Shipping Weight Per 1000 |
|---|---|---|---|
| WA 120 | 1000, 5000 | 1-3/16 | 6 lbs. |
| WA 150 | 1000, 5000 | 1-1/2 | 8 lbs. |
| WA 175 | 2000 | 2″ | 19 lbs. |
| Mild Steel | |
|---|---|
| Plating | Galvanized |
| Thickness | .015 nom. |
| Edges | Beveled |
| Stainless Steel | |
|---|---|
| Plating | Galvanized |
| Thickness | .015 nom. |
| Edges | Beveled |
| Aluminum | |
|---|---|
| Plating | Galvanized |
| Thickness | .015 nom. |
| Edges | Beveled |
.