CB200-40 Adhesive
Full Specifications
| Group | Click Bond Accessories |
| Brand | Click Bond |
| Part #: | CB200-40 |
| U/M | Each |
| Cure Time: | @75°F 30min for handling strength. 2hrs for 90% of Ultimate strength. 24hrs for full cure. |
| Storage: | Store below 72°F in a dry place. Refrigerate for maximum shelf life (DO NOT FREEZE) |
| Shelf Life | 6 months when stored in original at 72°F. Shelf life can be extended to 1 year if refrigerated between 35°F to 50°F |
CB420-50
Full Specifications
| Group | Click Bond Accessories |
| Brand | Click Bond |
| Part #: | CB420-50 |
| U/M | Each |
| Cure Time: | @75°F 15-18min for 75% cure. 24hrs for full cure. |
| Storage: | Store in a dry place. Refrigerate for maximum shelf life between 55°F and 75°F |
| Shelf Life | 9 months when stored in original packaging at 55°F to 75°F. Shelf life can be extended if refrigerated between 45°F to 55°F |
CB100
Manual adhesive dispensing gun designed for use with Click Bond two-component adhesive cartridges. The dispenser handle is paired with specific slides for proper dispensing of materials of various component ratios.
CB106
Recommended for use in conjunction with Click Bond adhesive cartridges, the CB106 static mixing tip provides thorough mixing of adhesive components during dispensing, ensuring optimal adhesive consistency and bond strength. Designed to twist and lock onto the end of the Click Bond adhesive cartridge, Click Bond mixing tips provide not only proper interleaving of pre-ratioed components but additionally pre-phasing to ensure optimum mix uniformity.
To prevent pre-mix of the adhesive, the tip integrates a barrier separating the individual adhesive components until they reach the integral mixer. If open time of adhesive in the mixing tip exceeds the adhesive pot life, the adhesive will become cured in the tip, preventing further dispensing. Removal of the used tip and replacement with a fresh tip is as simple as twisting to remove the cured tip, wiping off the end of the cartridge, and twisting a new tip in place. CB106 mixing tips are compatible with all Click Bond adhesives and can be used in place of the original cartridge cap when partially used cartridges are stored between applications.
CB911
Pre-saturated wipe contains Click Bond recommended solvent blend optimized for surface preparation of metallic and composite substrates and Click Bond fasteners. CB911 solvent blend has perfect balance of aggressiveness, material compatibility, and flashoff time to deliver optimal surface cleanliness.